Perancangan Ulang Alat Bantu Proses Assembly Touch Panel Untuk Mengurangi Cacat Produk Menggunakan Metode Quality Function Deployment
DOI:
https://doi.org/10.62375/jmrib.v2i2.175Keywords:
Perancangan ulang, house of quality, proses Assembly touch panelAbstract
The Touch Panel Assembly process is the process of gluing the Touch Panel to the Cover which is used to cover the display on the scale. The gluing process is carried out with the help of a jig with a manual system. The output of the Touch Panel Assembly Process using the current jig is still far from the target and also for the resulting output there are still many Rejects (Peel Off) on one side. This research was conducted to increase output and reduce Peel Off in the touch panel assembly process.
The redesign of the jig tool in this study was carried out using the Quality Fungtion Deployment method by basing consumer needs in the design process. Data collection was carried out by distributing questionnaires to 10 people consisting of operators, production leaders and also Quality Control.
The results of data collection from the questionnaire found that there is a need to replace the method in the Touch Panel Assembly Process, namely the Pressing method. Therefore, the new jig design can be used by using a lever as a press tool. Then the use of a stopper so that the Touch panel and cover are attached longer without having to be held in the lever area. The output produced after using the new jig design increased by 72% and for Peel off output was reduced by 76% so it is considered that the new jig design can increase production output.
Downloads
References
Amalia, R.N. and Dianingati, R.S., 2022. ‘Pengaruh jumlah responden terhadap hasil uji validitas dan reliabilitas kuesioner pengetahuan dan perilaku swamedikasi’. Generics: Journal of Research in Pharmacy, 2(1), pp.9-15.
Andriani, D.P., Hamdala, I., Swara, S.E. and Fadli, H., 2019. ‘Perancangan Business Digital Platform dalam Mendukung Keberlanjutan IKM dengan Pendekatan Quality Function Deployment’. Jurnal Ilmiah Teknik Industri, 18(1), pp.42-54.
Delvika, Y., 2020. ‘Analisis Kualitas Produk Rumah Tangga Dengan Metode Quality Function Deployment (QFD) Pada PT. ABC’. Jurnal Ilmiah Teknik Industri Prima (JURITI PRIMA), 4(1).
Irwan, Hery. Dan Fauziyah Nur Jamal,2021. ‘A Study Review Quality For Deployment Fungtion House Of Quality Deployment Based On Green Marketing’, Jurnal Program studi Teknik Industri
Lores, L. and Siregar, R., 2019. ‘Biaya kualitas, produktivitas dan kualitas produk: Sebuah kajian literatur. Jurnal Akuntansi dan Bisnis’: Jurnal Program studi Akuntansi, 5(2), pp.94-101.
Murnawan, H. and Wati, P.E.D.K., 2018. ‘Perancangan ulang fasilitas dan ruang produksi untuk meningkatkan output produksi’. Jurnal Teknik Industri, 19(2), pp.157-165.
Priyono, P. and Yuamita, F., 2022. ‘Pengembangan Dan Perancangan Alat Pemotong Daun Tembakau Menggunakan Metode Quality Function Deployment (QFD)’. Jurnal Teknologi dan Manajemen Industri Terapan, 1(3), pp.137-144.
Purbasari, A., Nurlaila, Q., Novrianti, T. and Aulia, M., 2022, March. ‘Aplikasi Keilmuan Teknik Industri Pada Industri Kecil Menengah (Ikm) Gedeku “Kripik Kari Pagoda”. In Prosiding Seminar Nasional ADPI Mengabdi Untuk Negeri (Vol. 2, No. 2, pp. 92-100).
Sadewo, A., 2020. ‘Perancangan ulang alat bantu jig menggunakan pendekatan metode quality fungtion deployment (QFD) Di CV. Seken living’. Industrial engineering journal of the University of sarjanawiyata tamansiswa, 4(1).
Supriadi, R., 2013.’Desain Jig Pada Proses Twisting Untuk Peningkatan Produktivitas
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 anggie eka putri, Hery Irwan
This work is licensed under a Creative Commons Attribution 4.0 International License.
